Decorating On A Budget: My Ombré Staircase

Click on the picture to read about how I created my colour gradient stairs.

How to create an ombré staircase –

One of the first projects I completed in our house was our staircase. It wasn’t easy, but it was one of the first things I wanted to cross off my list as I knew it would give us a lift every time we came home.

Click on the picture to see how I created our dark to light green gradated colour staircase.

 

It wasn’t too expensive either, as I bought one custom mixed tin of satin Valspar paint from B&Q and mixed it with a cheaper white satin in increasing amounts.



Before

The stairs were covered in a very strange, almost iridescent pink-purple carpet when we bought the house. The worst bit, though, was the smell. It was stained, smelly and unsalvageable. We ripped it up straight away, but then we had to contend with the paint underneath.

This is our staircase as we inherited it. Click on the picture to see the painted staircase transformation!

Preparation

Stripping and sanding the stairs was the absolute worst part. I tried a caustic soda solution as well as a heat gun and scraper, and then we sanded with an electric orbital sander. It was a messy, difficult job. But then, hooray! I got to do the fun bit at last!

 

How to mix paint in a gradient

If you want to paint your stairs like this as well, I’d recommend getting a set of containers for mixing your paint, and using a measuring spoon you’re not too fond of, as it’ll be thickly coated in paint by the time you’re done.

I used some cheap food containers from Wilko. They do the job brilliantly, are just the right size for the amount of paint each riser needed, and they seal the leftover paint for future use – touch-ups for the inevitable dings and scrapes.

Number the lids and sides of your containers as well, as you won’t see the difference between steps very easily.

I started by marking a container for each riser, with 1 at the bottom and 12 at the top. The top riser was number 13, but was painted in paint straight from the original pot, with no white.

Then, I measured out each pot according to its number.

Numbered, lidded pots of paint.

Every riser had to add up to thirteen, so number 12 got 12 scoops of green and one scoop of white; number 11 got 11 scoops of green and two scoops of white and so on, until at the bottom, number one got 1 scoop of green and 12 scoops of white paint.

Mixing the paint for my staircase.

Really simple! just use the amount of stairs in your staircase to work out your gradient.

Ombré stairs in progress.
Mixed colours on their corresponding treads. The balustrade is painted in the same way, fading from dark green to white.

 

I’m so pleased with how this one turned out, and how cheap it was! Considering how expensive decorating a house can be, saving money on projects like these is essential.

How to create your own ombré stairs. Click on the picture to see our diy painted stairs and learn how to mix paint to create a graduated effect.
Finished!

Well, what do you think of my painted staircase? Fancy trying a project like this one?

Update – Have a look at my completed house!

Here rare the before and after pictures of my DIY home makeover project! We've saved lots of money by doing our house renovation on our own - see what we've done!

Like this? Read these:

4 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.